|
|
.gif)
RF Design | RF Systems and Subsystems | Wireless Engineering |
Transceiver Development
"Turnkey" Provider of RF Systems From Concept
To Production
NuWaves is a RF Power House - a few of our capabilities include: communications modules, RF propagation analysis, high power T/R switch modules, power amplifier designs,
diplexers, noise modules, synthesizers, receivers, transceivers, transmitters, modulators, IF chains, up-converters, down-converters, front ends, low noise amplifiers, research and development, spectral surveys, and high performance filters.
NuWaves utilizes state-of-the-art design and simulation tools.
Furthermore, our capital equipment inventory includes high
performance engineering equipment and includes a full battery of RF
and Digital test equipment, RF Screen Cage, and Pick-N-Place
machines.
Contact our design services staff to get your design underway today.
Outsourcing your RF and Wireless
Engineering Designs.
DESIGN EXAMPLES:
Power Amplifiers:
NuWaves delivers custom high performance power amplifiers to
support numerous military requirements including broadband,
bi-directional, variable output, high linearity, and high
efficiency. Custom solutions tailored to the modulating waveform
as well as state-of-the-Art Research and Development are among
the many strengths of the NuWaves team.
The RFU8096PA delivers better than 50 Watts of RF power when
driven with 10 Watts. The Power Amplifier delivers broad-band
operation covering 800 - 960 MHz. Operating in class AB mode,
the assembly supports both Analog and Digital modulation
formats. Applications include Cellular Base Stations.
This 100 Watt Power Amplifier operates in the HF band
delivering burst transmissions with high duty cycles. The pulsed
amplifier is highly reliable and meets the demanding
environmental requirements within the industrial market place.
VSWR protection, programmable on/off duty cycles and pulse
repetition rates, as well as programmable RF output power are
only a few of the attributes of this high quality design.
RF Transceivers:
-
VHF RF data
transceivers:
NuWaves’
RF-V-47-TR
VHF data transceiver is a high performance and cost effective
transmitter/receiver designed for operation at 47 MHz. The
transceiver operates on one of two channels providing half
duplex communications. The message formatting, synchronization,
and transceiver transmission/reception is performed by the
transceiver; no special host software is required to operate the
radio. The transceiver boasts a unique NuWaves proprietary RF
architecture. The robust design provides the user with future
growth capabilities. For example, with little modification, the
transceiver can be tailored to operate over other frequency
bands and/or deliver higher RF output power.
-
UHF RF data
transceivers:
The
RF-U-3545-TR-2 RF Module
produces 100mW of RF at the antenna port. The transceiver
delivers extremely low transmit spurious signals. The design
includes robust defenses from against interface issues such as
over-voltage, over-current, and reverse voltage protection. The
demodulated receiver data is uncorrelated and requires
integration into the OEM's host controller for bit
synchronization and parsing of messages thereby forming an
entire Radio Transceiver.
The RF-U-3545-TR-1 RF Module
boasts dual RF output power modes. The transceiver incorporates
state-of-the-art power amplifier protection circuitry including
a Voltage Standing Wave Ration (VSWR) detector that provides a
go/no go indication, over-voltage, and reverse voltage
protection. The design includes power detection methods that
hold the RF output power relatively constant over varying
conditions such as temperature and supply voltage. The
transceiver interfaces to OEMs controller board to form a
complete radio solution.
Other:
The RF70MV1 converts 70 MHz RF signal inputs to a
band-limited output at 3 kHz. The output of the module is
directly compatible with standard COTS computer sound cards and
interfaces seamlessly. The circuit card assembly is housed in a
miniature self-contained package.
NuWaves designs receivers and tunable front-end circuitries
for software controlled radios and custom up/down-converters.
Broad-band and low noise performance delivered in miniature form
factors are among the many skill sets that NuWaves brings to the
ELINT, SIGINT, SDR, and COMINT receiver developments.
The Radio Channel:
Site Surveys and RF Propagation Analysis
RF Engineering Design Services:
RF Engineering Design Services
Digital Engineering Design Services:
FPGA Design
Local Oscillators,
Synthesizers, PLLs, and VCOs
Frequency Multipliers
RF Filter Solutions
Product Miniaturization
High Performance
Varactor Tuned Filters
RF Front-Ends and
Back-Ends For Software Defined Radios
Bi-Directional
Amplifiers
Power Amplifiers
Low Noise Amplifiers
Differentiators
Upconverters and Downconverters for VHF, UHF, L-Band, S-Band, and C-Band Systems
Telemetry Transmitters
Quick Reaction Shop
Transceiver Design: Custom VHF/UHF Transceiver Designs
Antennas:
Design and Analysis
Manufacturing and Test:
Test Fixtures, Test Procedures, Burn-In, Failure Analysis, etc.
Schematic Capture and Printed Circuit Board Layout:
OrCAD
and Allegro Design Tools - Analog, Digital, and RF
Design Verification:
Third Party, EMI, FCC, MIL -810, MIL-461 Testing Assistance
RF Design | RF Systems and Subsystems | Wireless Engineering | Transceiver Development
"Turnkey" Provider of RF Systems From Concept To Production
NuWaves is a RF Power House - a few of our capabilities include: communications modules, RF propagation analysis, high power T/R switch modules, power amplifier designs,
diplexers, noise modules, synthesizers, receivers, transceivers, transmitters, modulators, IF chains, up-converters, down-converters, front ends, low noise amplifiers, research and development, spectral surveys, and high performance filters.
NuWaves utilizes state-of-the-art design and simulation tools.
Furthermore, our capital equipment inventory includes high
performance engineering equipment and includes a full battery of RF
and Digital test equipment, RF Screen Cage, and Pick-N-Place
machines.
Contact our design services staff to get your design underway today.
Outsourcing your RF and Wireless
Engineering Designs.
DESIGN EXAMPLES:
Power Amplifiers:
NuWaves delivers custom high performance power amplifiers to
support numerous military requirements including broadband,
bi-directional, variable output, high linearity, and high
efficiency. Custom solutions tailored to the modulating waveform
as well as state-of-the-Art Research and Development are among
the many strengths of the NuWaves team.
The RFU8096PA delivers better than 50 Watts of RF power when
driven with 10 Watts. The Power Amplifier delivers broad-band
operation covering 800 - 960 MHz. Operating in class AB mode,
the assembly supports both Analog and Digital modulation
formats. Applications include Cellular Base Stations.
This 100 Watt Power Amplifier operates in the HF band
delivering burst transmissions with high duty cycles. The pulsed
amplifier is highly reliable and meets the demanding
environmental requirements within the industrial market place.
VSWR protection, programmable on/off duty cycles and pulse
repetition rates, as well as programmable RF output power are
only a few of the attributes of this high quality design.
RF Transceivers:
-
VHF RF data
transceivers:
NuWaves’
RF-V-47-TR
VHF data transceiver is a high performance and cost effective
transmitter/receiver designed for operation at 47 MHz. The
transceiver operates on one of two channels providing half
duplex communications. The message formatting, synchronization,
and transceiver transmission/reception is performed by the
transceiver; no special host software is required to operate the
radio. The transceiver boasts a unique NuWaves proprietary RF
architecture. The robust design provides the user with future
growth capabilities. For example, with little modification, the
transceiver can be tailored to operate over other frequency
bands and/or deliver higher RF output power.
-
UHF RF data
transceivers:
The
RF-U-3545-TR-2 RF Module
produces 100mW of RF at the antenna port. The transceiver
delivers extremely low transmit spurious signals. The design
includes robust defenses from against interface issues such as
over-voltage, over-current, and reverse voltage protection. The
demodulated receiver data is uncorrelated and requires
integration into the OEM's host controller for bit
synchronization and parsing of messages thereby forming an
entire Radio Transceiver.
The RF-U-3545-TR-1 RF Module
boasts dual RF output power modes. The transceiver incorporates
state-of-the-art power amplifier protection circuitry including
a Voltage Standing Wave Ration (VSWR) detector that provides a
go/no go indication, over-voltage, and reverse voltage
protection. The design includes power detection methods that
hold the RF output power relatively constant over varying
conditions such as temperature and supply voltage. The
transceiver interfaces to OEMs controller board to form a
complete radio solution.
Other:
The RF70MV1 converts 70 MHz RF signal inputs to a
band-limited output at 3 kHz. The output of the module is
directly compatible with standard COTS computer sound cards and
interfaces seamlessly. The circuit card assembly is housed in a
miniature self-contained package.
NuWaves designs receivers and tunable front-end circuitries
for software controlled radios and custom up/down-converters.
Broad-band and low noise performance delivered in miniature form
factors are among the many skill sets that NuWaves brings to the
ELINT, SIGINT, SDR, and COMINT receiver developments.
The Radio Channel:
Site Surveys and RF Propagation Analysis
RF Engineering Design Services:
RF Engineering Design Services
Digital Engineering Design Services:
FPGA Design
Local Oscillators,
Synthesizers, PLLs, and VCOs
Frequency Multipliers
RF Filter Solutions
Product Miniaturization
High Performance
Varactor Tuned Filters
RF Front-Ends and
Back-Ends For Software Defined Radios
Bi-Directional
Amplifiers
Power Amplifiers
Low Noise Amplifiers
Differentiators
Upconverters and Downconverters for VHF, UHF, L-Band, S-Band, and C-Band Systems
Telemetry Transmitters
Quick Reaction Shop
Transceiver Design: Custom VHF/UHF Transceiver Designs
Antennas:
Design and Analysis
Manufacturing and Test:
Test Fixtures, Test Procedures, Burn-In, Failure Analysis, etc.
Schematic Capture and Printed Circuit Board Layout:
OrCAD
and Allegro Design Tools - Analog, Digital, and RF
Design Verification:
Third Party, EMI, FCC, MIL -810, MIL-461 Testing Assistance
VHF RF data transceivers:
NuWaves’ RF-V-47-TR VHF data transceiver is a high performance and cost effective transmitter/receiver designed for operation at 47 MHz. The transceiver operates on one of two channels providing half duplex communications. The message formatting, synchronization, and transceiver transmission/reception is performed by the transceiver; no special host software is required to operate the radio. The transceiver boasts a unique NuWaves proprietary RF architecture. The robust design provides the user with future growth capabilities. For example, with little modification, the transceiver can be tailored to operate over other frequency bands and/or deliver higher RF output power.
UHF RF data transceivers:
The Radio Channel:
Site Surveys and RF Propagation Analysis
RF Engineering Design Services:
RF Engineering Design Services
Digital Engineering Design Services: FPGA Design
Local Oscillators, Synthesizers, PLLs, and VCOs
Frequency Multipliers
RF Filter Solutions
Product Miniaturization
High Performance Varactor Tuned Filters
RF Front-Ends and Back-Ends For Software Defined Radios
Bi-Directional Amplifiers
Power Amplifiers
Low Noise Amplifiers
Differentiators
Upconverters and Downconverters for VHF, UHF, L-Band, S-Band, and C-Band Systems
Telemetry Transmitters
Quick Reaction Shop
Transceiver Design: Custom VHF/UHF Transceiver Designs
Antennas:
Design and Analysis
Manufacturing and Test:
Test Fixtures, Test Procedures, Burn-In, Failure Analysis, etc.
Schematic Capture and Printed Circuit Board Layout:
OrCAD
and Allegro Design Tools - Analog, Digital, and RF
Design Verification: Third Party, EMI, FCC, MIL -810, MIL-461 Testing Assistance
 |
|
 |
| RF Data Transceivers | RF Distribution Assemblies |
High Performance Down-Converters |
 |
 |
 |
| Prototype Assembly | Quick Solutions to Filtering | Environmental Temperature Testing |
 |
 |
 |
| Quick Turn PCB Prototyping Machine | Custom RF Filter Solutions | Field Testing and Evaluation |
